Application guide

How Hena Ceramic slips are installed on insulated facades, render, concrete and interior walls — always with the Pevalit system.

Pevalit products are mandatoryUse Pevalit adhesives, grouts and sealants for every Hena Ceramic installation. Installations with other products are not covered by the Hena Ceramic product guarantee.

One system, from wall to joint.

On an insulated facade every layer between masonry and the finished joint comes from Pevalit — so adhesion, movement and frost behaviour are tested together.

  1. Masonry or concrete wallClean, dry, load-bearing substrate
  2. Pevalit facade adhesiveBonds the insulation boards
  3. Pevalit EPS insulation boardsThickness per energy calculation, anchored as specified
  4. Reinforced base coatPevalit adhesive with embedded glass-fibre mesh
  5. Pevalit facade adhesiveCombined (buttering-floating) method, full contact
  6. Hena Ceramic clinker slip, 10 mmAny collection and format
  7. Pevalit groutJoint colour chosen with your slip

Six steps to a solid-brick facade.

  1. 01Prepare the substrateThe surface must be dry, even, load-bearing and free of dust and release agents. Level uneven walls with Pevalit plaster.
  2. 02Set out the bondMark horizontal courses and plan corners, openings and movement joints. Mix slips from several packs for an even natural shading.
  3. 03Apply Pevalit adhesiveComb the adhesive onto the wall with a notched trowel and butter the back of each slip — full contact, no voids.
  4. 04Lay slips and cornersStart with corner pieces, then lay courses with a consistent joint of about 10–12 mm.
  5. 05Grout with PevalitOnce the adhesive has set, fill joints with Pevalit grout, compact and strike flush or slightly recessed.
  6. 06Seal movement jointsClose movement joints and window and door connections with Pevalit silicone sealant.

Do not install below +5 °C, in rain or strong sun. Always follow the current Pevalit technical data sheets.

Official partnerPEVALIT
Livadhi, 6338 Struga, North Macedoniainfo@pevalit.com+389 46 70 85 20

Why we chose Pevalit.

Pevalit is a construction-chemicals supplier based in Struga, North Macedonia, with roots going back to 1994. Its adhesives, grouts, plasters, EPS boards and sealants are available across the region — so every Hena Ceramic project can be supplied, advised and serviced locally.

Pevalit facade adhesivePevalit groutPevalit plasters & EPS boardsPevalit silicone sealantPevalit tile adhesivesPevalit waterproofing

Frequently asked questions.